Mounter Sleeve Dedicated – Wide Web – Moving Camera (2CS)
A market leading plate mounter has to meet several objectives – high level of repeatable accuracy; reliability; ease of use and speed. Strength of construction, accuracy of machining and design/component selection feature heavily in achieving the first two objectives.
- Ease of use and speed are achieved through intelligent design of the machine layout and control system. The 2CS Cobra from J M Heaford ltd meets all of these objectives without compromise.
- The machine in standard format has twin moving cameras powered by linear motors and an ultra -precise measuring system with repeatable accuracy of + / - 1 micron. The cameras are fixed focus units and move on an air motor driven support beam which as an option can be upgraded to servo drive for fully automatic camera beam positioning.
- The sleeve mandrel is fixed rigidly in the high strength deflectionresistant frame and supported at the opening end by a sliding bearing assembly which pivots away to give access to the mandrel for sleeve changeover. Different mandrel adaptors are available as are couplings to supply air to those step up adaptors which have side wall air feeds.
- The vision system on the machine is PC-based and offers a range of selectable target formats, digital image enlargement, video image recording and other features. Camera optical magnification of 100 or 150 can be chosen. If the optional plate pressure roller is specified, chosen magnification is limited to 100. The machine uses a single 17" touch screen for both camera image (split screen) and control functions. A second camera image monitor can be supplied if required.
- A combination of (optional) rear plate support table and pneumatically actuated pressure roller allow the operator to attach the plate to the stickyback without having to apply the contact pressure by hand. Mandrel rotation is via foot pedal and a second footpedal controls the rear table.
- For customers who apply stickyback to sleeves circumferentially and who use the mounter for this we can offer two types of application holder for the tape roll – one with an integral pressure roller and one without. Both these applicators can also be supplied on a standalone sleeve dedicated tape and plate work station to increase the work flow through the mounter.
- Our highly successful plate cutter is also available as an option on this machine.